Other Repair Materials and Parts
Model: Carbon Blend
Spigots are used to repair a broken shaft or create a join point in a shaft.
Available in three sizes of Outer Diameter:
26.0mm OD26.5mm OD
27mm OD They are 16cm Long.You can also buy Paddle pins separately to create a spigot and pin joint.
..
$15.00
Ex Tax:$13.64
Model: toggle display
Offered in Blister Packs, or loose without display packaging.
Toggle carry handle with securing cord.
1 per Packet..
$9.96
Ex Tax:$9.05
Hot
Model: Luggage
Offered in Blister Packs or Loose wthout display packaging. Sold individually.
Replacement carry handle, will fit a wide range of kayaks.
2 Hole spacings allow fitting a variety of ways. Bolt seperation can be anywhere from 6cm to 26cm.
Total Handle Length 265mm, C-C for bol..
$14.95
Ex Tax:$13.59
Brand: Galasport
Model: Normal
Need a new set of footrests for your slalom boat?
Footrests made of duraluminium for slalom or polo boats. There are two sizes commonly reffered to as Long and Short.Short footrests - 215mm (track length), allowing a pedal adjustment of
140mm - best for fully grown adult paddlers, w..
$89.95
Ex Tax:$81.77
Brand: Other
Model: Confluence Welding rods
Confluence Welding Rods - 10 PackFactory colours for Dagger Kayaks, Perception Kayaks, Wilderness Systems, Mad River Canoes, but will work with any Linear HDPE Kayak
Sticks are linear polyethylene plastic
that is compatible with most makes and models of rotationally molded
..
$22.95
Ex Tax:$20.86
Model: brass pairs
Sold in Pairs, in Blister Packaging.
Well suited to replace failed clips on Sit on Top Seats...
$14.95
Ex Tax:$13.59
Model: Padz
Customize your kayak's fit. Use sandpaper to custom shape each pad for comfort and control. Buy a whole kit or individual pieces. Peel and stick (self adhesive) contoured closed mini-cell foam. SpecsDimensions:13.5" x 9.5" / 34cm x 24cmMaterial:1/4" thick / 6mmCategory:Back Bands & SeatsFoa..
$39.95
Ex Tax:$36.32
-59 %
Model: Technilift
This classic gel seat pad for upspecing your standard seat or as an OEM replacement part for some Perception touring kayaks circa 2005. It can also be adapted to fit many other kayaks.Pad dimensions are approx.37 x 33cm, & about 1/4 inch thick.Can be attached with 4 x push rivets (not included) ..
$16.50 $39.95
Ex Tax:$15.00
Brand: Dagger
Model: Dagger Axis Thighbrace Pair
This pair of thigh braces is a basic plastic version of the Dagger and Perception Thigh brace kit. They can be utilized or modified to customize the fit in your kayak.This thigh brace fits both old and new kayaks by Perception and Dagger. This is the low volume model most common on touring kayaks .T..
$139.00
Ex Tax:$126.36
Brand: Immersion Research
Model: reggie
Reggie Backband
The original ratcheting backband
The Reggie Backband is a direct replacement for your OEM backband that's easy to install in nearly any boat that's not equipped with a forward adjust backband system. Featuring our patented adjustable, no-slip ratchet technol..
$129.00
Ex Tax:$117.27
In Stock
Brand: Kokopelli Inflatables
Model: EVA
The EVA Backband merges the best of the hardshell kayaking world and packrafting. Made from molded EVA foam the backband is rigid but provides excellent comfort. It also features a small pocket on the back for a snack or repair kit. The EVA Backband is engineered to provide adjustability, back suppo..
$99.95
Ex Tax:$90.86
Brand: Immersion Research
Model: reggie
Forward Adjust Reggie Backband
A great replacement for your OEM backband
The Reggie Forward Adjust Backband is a direct replacement for most modern boats with backband adjustments on the thigh braces. Featuring our patented adjustable, no slip ratchet technology, the Reggie Forew..
$129.00
Ex Tax:$117.27
Out Of Stock
Brand: Immersion Research
Model: lounge
Lounge Backband
A larger, more supportive version of original ratcheting backband
The Lounge band Backband is a direct replacement for your OEM backband that's easy to install in nearly any boat that's not equipped with a forward adjust backband system. Featuring our patented adj..
$129.00
Ex Tax:$117.27
New
Brand: Galasport
Model: Slalom C1 hip pad flange
The carbon hip pad is light and rigid.2 Shapes to suit traditional C1 Cockpits and More modern K1 Shape cockpits..
$69.95
Ex Tax:$63.59
New
Brand: Galasport
Model: Slalom C1 Knee Block
The carbon Knee Block is light and rigid...
$144.99
Ex Tax:$131.81
New
Brand: Galasport
Model: Slalom C1 Knee Block foam
The carbon Knee Block is light and pre padded and shaped. Easy to install with quick grip...
$89.95
Ex Tax:$81.77
New
Brand: Galasport
Model: Slalom C1 Seats
The carbon Seat is light and rigid. Trim the lower edge to set what ever seat height you desire.Available in both straight back and bent back versions...
$144.99
Ex Tax:$131.81
Brand: Galasport
Model: Slalom K1 Seats
The creator of this seat is the phenomenal Canadian kayaker, world
champion and participant in five Olympic Games, David Ford. In addition
to being the designer of two highly successful boats for Galasport - the
SONIC and the SONIC BOOM, David wanted a seat for his boat that was
simply "ordi..
$99.00
Ex Tax:$90.00
Brand: Ruk Sport
Model: 25mm
These Black Nylon Clips will securely fasten pipes, shafts, tubes etc where you want them. the 25mm Size will fit tubes upto 32mm in Diameter and includes the ruk sport paddle range.
Sold in Pairs in Bister Display Boxes..
$7.94
Ex Tax:$7.22
Model: Leafield D7
Repair kit for the Leafield D7 Valve.Includes spare valve cap o-ring and components for the
inflation/deflation plunger (core seal, spindle and stainless steel
spring)...
$19.95
Ex Tax:$18.14
Model: Leafield wrench
Product DetailsSpecifically designed for the C7 and D7 Leafield Inflate/Deflate Valves and Leafield A6 Pressure Relief Valve...
$34.95
Ex Tax:$31.77
Brand: MRS - Micro Rafting Systems
Model: Boston
MRS Glue on Boston Valve Base Plate and ValveThis includes, The TPU plate to attach to your raft, with a Valve base refitted by the experts at MRS, the 1 way valve and valve cap - everything you need from start to finish to attach an Valve to a raft.The Boston Valve provides both 1-way and 2-way air..
$34.95
Ex Tax:$31.77
Model: Leafield
The low-profile Leafield C7 Valve has become the gold standard for use
in today's high-performance inflatables. It's rugged, dependable and
easily maintained.The extremely durable acetal plastic parts are resistant to chemicals and ozone.Low-profile cap prevents snagging on other equipment and s..
$34.95
Ex Tax:$31.77
Model: Leafield
The D7 Valve is a great addition to the Leafield line of quality valves.
Its internal screen keeps things like stray drop-stitch threads from
getting in the sealing surface.Replacing the C7 valve in some instances, the D7 has an enhanced
clamping surface that helps prevent leaks in high pressu..
$29.95
Ex Tax:$27.23